中山高低温恒温测试机厂家

ZY6013高低温恒温试验箱
High and low temperature constant temperature test chamber
 
温度范围       -20℃、-40℃、-50℃、-65℃~+130℃
温度波动度     ±0.5℃
温度均匀度     >2℃
Temperature range - 20 ℃ and 40 ℃, 50 ℃, 65 ℃ ~ + 130 ℃
Temperature fluctuation degree of plus or minus 0.5 ℃
Temperature evenness > 2 ℃


型号                         工作室尺寸
Model                        studio size
ZY6013-50                    350×400×350mm
ZY6013-100                   400×450×550mm
ZY6013-225                   500×600×750
ZY6013-800                   800×1000×1000


-40℃以下为双压缩机具有超载保护装置  
Below 40 ℃ for the compressor has the overload protection device  
 
符合的测试规范有：Conform to the test specifications are:
MIL STD,GB,JIS,JEDEC,IEC等。


产品优势：Product advantage:
定值条件可设定时间： 0 ~9999小时59分钟。 
程式容量：可编辑120组程式×1500段,每段可设定时间0~99小时59分钟，段数可任意分割,程式可自由相互联结。
循环设定：可执行9999×999回次数循环,且可再切割出5组独立之部份循环。  
控制方式：先进斜率控制逻辑，采智能型PID+SSR/SCR正逆双向同步输出。 
资料设定：触控式对话框设定模式,操作简易明确,内建目录数据管理系统。
曲线绘制：实际运转温湿度曲线记录、显示;当程式设定的温、湿度、时间资料完成,可立即转成设定曲线。
时间讯号：3组时式控制输出接口,搭配10种之时间控制模式,方便执行外部驱动组件启/停之时式规画。
终了温度：在完成测试时,可选择执行返回常温之状态,以利测试物取出。  
安全检知：全功能之系统侦测,确保机台运转安全.并可自动显示故障项目。
外部保护：独立式超温保护装置,可设定受测对象的温度上限保护。  
通信接口：附RS-232及RS-485之标准通信接口装置。　
Conditions of constant value can be set time: 0 ~ 9999 hours 59 minutes.
Program capacity: editable 120 x 1500 group program segments, each segment can be set time 0 ~ 99 hours 59 minutes, can be arbitrary section number segmentation, freely, connected.
Circulation set: 9999 x 999 back to the number of cycle, executable and can be cut out 5 groups of independent part of the cycle.
Control mode: advanced slope control logic, adopt intelligent PID + SSR/SCR is inverse two-way synchronization output.
Data set: touch dialog box set pattern, operation simple and clear, built-in catalog data management system.
Curve is drawn: the actual operation curve of temperature and humidity record, display; When the program set the temperature, humidity, time information is complete, can immediately to set curve.
Time signal: 3 groups of control output interface, collocation of 10 kinds of control mode, the time is convenient to perform external drive component type planning start/stop.
Temperature: the end of the test, normal temperature may choose to perform a return to the state, and the test content.
Safety detector: full function of the system detection, ensure the machine running safety. And can automatically display fault project.
External protection: independent type overtemperature protection device, can set the upper limit of the temperature of the object under test.
Communication interface: with the RS - 232 and RS - 485 standard communication interface device.
         

(东莞市高低温恒温测试机厂家)
中山高低温恒温测试机厂家