PNEU-HYDRA减压阀
面议
买方承担运费
南昌市
产品详情（南昌市PNEU-HYDRA减压阀厂家）
品牌：
REXROTH/力士乐
材质：
碳钢
连接形式：
螺纹
适用介质：
水
结构形式：
薄膜式
压力环境：
高压
工作温度：
低温
标准：
美标
流动方向：
单向
驱动方式：
电磁
零部件及配件：
配件
形态：
蝶式
类型(通道位置)：
二通式
关键词：南昌市PNEU-HYDRA减压阀厂家
Pneu-Hydro Products
Pneu-Hydro Products has long been a leading manufacturer of pneumatic and hydraulic valves and systems for the aircraft and missile industry. More recently, Pneu-Hydro has also pioneered in the design and fabrication of a rapidly growing line of industrial valves for hydraulic, pneumatic, and specialized fuel applications, especially as applied to automated production equipment and precision machinery of all types.Typical commercial products include control valves, regulators, check valves, relief valves, filters, and actuators.
With completely integrated development, engineering, testing, and manufacturing facilities, Pneu-Hydro can meet your most exacting specifications. In many cases existing designs can be applied quickly to your requirements with a speed that rivals off-the-shelf delivery. All our facilities and experience are at your disposal. Feel free to call on us to discuss your problem.
Inline Relief Valves
Pneu-Hydro bar stock relief valves remain bubble-tight up to cracking pressure. They reseal at less than 10% drop from cracking pressure in lower ranges, and less than 5% at higher ranges.Cracking pressure is reliable, repeatable and easily set by an internal adjustment, which is tamper-proof once the valve is installed in the system. An O-ring seals the poppet while a metallic stop bears the spring load. This simple design provides crisp settings and long life. The standard valve is constructed of 316 stainless steel for strength and durability in the most corrosive applications.
Specifications
| Operating pressure ranges | |
| 401 series | 50 to 3,000 psid |
| 402 series | 4,000 to 10,000 psid |
| Operating temperature ranges | |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
Ordering Information
| |||||||||||||||||||||||||||||||||||||||||||||||||
| 1Dash number for desired pressure range must be inserted. 2Buna-N is standard elastomer and requires no code. For Viton, insert “V”. Consult factory for other materials. For example, Model No. 401F4Q-2V specifies an inline relief valve with 1/4 NPT female ports, Viton O-rings, and a 250 – 600 psid range. |
Miniature Relief Valves
Pneu-Hydro miniature relief valves provide zero leakage up to cracking pressure. They reseal bubble-tight within 5% to 10% of cracking pressure. Adjustments are insensitive to temperature variations.These miniature relief valves are made from 316 stainless steel for strength and corrosion resistance. Material options can be provided on request. Buna-N or Viton O-rings are standard but other O-ring materials can be provided. Back-pressure on the 405 and 407 series (with connected vent line) should be limited to 1,000 psid.
Specifications
| Operating pressure ranges | |
| 404 and 405 series | 50 to 5,000 psid |
| 406 and 407 series | 5,000 to 13,000 psid |
| Cv | .035 |
| Operating temperature ranges | |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
Ordering Information
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Notes: Material and connection options are also available. Consult factory. Optional materials include brass and aluminum. Optional connections include MS-33656-4. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Right Angle Relief Valves
Pneu-Hydro right angle relief valves are pressure balanced internally and pressure referenced to atmosphere. This yields insensitivity to downstream pressure and permits the valve to be used as a back-pressure regulator. The valve seals against a soft seat and has a metal stop that bears the spring load, prolongs seal life, and prevents sticking.These valves remain bubble-tight up to cracking pressure and reseal bubble-tight at less than 10% drop from cracking pressure (significantly less in the higher pressure ranges). The external setting adjustment is particularly useful in applications where changes are required. The design provides full flow at a very small rise above cracking pressure.
Features include a wide series of available pressure ranges, smooth, chatter-free performance, reliable and repeatable cracking and reseating pressures, along with 316 stainless steel construction. Seal material selections are available for compatibility with virtually any fluid chemistry. Standard seal materials are Buna-N and Viton.
Specifications
| Operating pressure ranges | |
| Proof pressure | 20,000 psig |
| Burst pressure | 40,000 psig minimum |
| Operating temperature ranges | |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
Ordering Information
| | Male Inlet and Female Outlet | Male Inlet and Outlet | Cv | ||
| Buna-N | Viton | Buna-N | Viton | ||
| 100 – 150 psid | 408M4F4Q-1 | 408M4F4Q-1V | 408M4Q-1 | 408M4Q-1V | .25 |
| 150 – 250 psid | 408M4F4Q-2 | 408M4F4Q-2V | 4048M4Q-2 | 408M4Q-2V | |
| 250 – 350 psid | 408M4F4Q-3 | 408M4F4Q-3V | 408M4Q-3 | 408M4Q-3V | |
| 350 – 600 psid | 408M4F4Q-4 | 408M4F4Q-4V | 408M4Q-4 | 408M4Q-4V | |
| 600 – 900 psid | 408M4F4Q-5 | 408M4F4Q-5V | 408M4Q-5 | 408M4Q-5V | |
| 900 – 1,500 psid | 408M4F4Q-6 | 408M4F4Q-6V | 408M4Q-6 | 408M4Q-6V | |
| 1,500 – 3,000 psid | 408M4F4Q-7 | 408M4F4Q-7V | 408M4Q-7 | 408M4Q-7V | |
| 3,000 – 5,000 psid | 408M4F4Q-8 | 408M4F4Q-8V | 408M4Q-8 | 408M4Q-8V | |
| 5,000 – 10,000 psid | 409M4F4Q | 409M4F4Q-V | 409M4Q | 409M4Q-V | .09 |
Check Valves
Pneu-Hydro’s bar stock check valves seal bubble-tight, even without back-pressure. When open, they provide a smooth flow-path with minimum resistance. The poppet is spring-loaded for positive operation regardless of orientation. Back pressure and spring loads are borne by a metal stop rather than the soft O-ring seal. This ensures long seal life and minimum maintenance. Operation is smooth and chatter-free.These check valves are constructed of 316 stainless steel for strength and corrosion resistance and meet the requirements of NACE MRO175. Because of their bar stock design, the valves can be easily made from a variety of materials to satisfy the needs of your operating environment. Buna-N or Viton seals are available from stock, and other O-ring materials can be provided.
Specifications
| Operating pressure ranges | |
| Maximum | 10,000 psid |
| Operating temperature ranges | |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
Ordering Information
| ||||||||||||||||||||||||||||||||||||||
| Notes: | ||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||
Hydraulic Quick-Vent Valves
Pneu-Hydro hydraulic quick-vent valves are designed to be placed in the line between a control valve and actuator. When control pressure is applied, the internal poppet closes the quick-vent port and directs flow through the outlet to the actuator. Upon release of pressure, the poppet’s internal check closes and the poppet is lifted off the vent seat. The large capacity of the outlet/vent passage permits rapid flow from the actuator.The valve is constructed of corrosion resistant materials in accordance with NACE MR-01-75.
Specifications
| Operating pressure ranges | |
| Maximum | 10,000 psid |
| Operating temperature ranges | |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
Ordering Information
| Part No. | Deion |
| 433254 | Buna-N seals |
| 433254-V | Viton seals |
Hand Valves
Pneu-Hydro hand valves offer design and operating features not typically found on valves of this pressure range. The Teflon stem packing is located below the stem threads and pintle swivel. This helps prevent contamination and lubrication washout by isolating this critical area from the process fluid. This, combined with the very low operating torque (less than 10 lb-inches), provides a precise “feel” and adjustment sensitivity over the lifetime of the valve.The valve stem is designed so that it cannot be inadvertently backed out of the valve. The low profile makes this valve ideally suited for panel mounted or other limited space applications.
Standard features include self-aligning swivel pintles to minimize seat scoring, Teflon stem seal, and 316 stainless steel construction to provide maximum compatibility with corrosive fluids.
Specifications
| Operating pressure ranges | |
| Maximum operating pressure | 10,000 psig (except 206F4Q) |
| Proof pressure | 20,000 psig |
| Burst pressure | 40,000 psig |
| Operating temperature ranges | |
| Temperature range | -65° to 450°F (-53° to 232°C) |
| Cv | .26 |
Ordering Information
| |||||||||||||||||||||||||||||||||||||||||||
| *6,000 psig maximum operating pressure | |||||||||||||||||||||||||||||||||||||||||||
Shuttle Valves
The heart of a Pneu-Hydro shuttle valve is a stainless steel ball. The slightest pressure blows this ball from one O-ring seat to the other and directs flow to the outlet port. The breakaway friction of sliding seal designs is eliminated by this “contact seal” principle.Pneu-Hydro shuttle valves are made from 316 stainless steel. Buna-N seals are standard, but Viton or other elastomers are available to meet specific requirements.
Specifications
| Operating pressure ranges | |
| Operating pressure | 250 psig (maximum) |
| Proof pressure | 375 psig |
| Burst pressure | 5,000 psig |
| Operating temperature ranges | |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
| Cv | .40 |
Ordering Information
| Part No. | Deion |
| 801F4Q | Buna-N seals |
| 801F4Q-V | Viton seals |
Pneumatic Control Valves
Pneu-Hydro’s pneumatic control valves are simple and robust. These smooth acting valves offer bubble-tight sealing. They can be line, panel, or bracket mounted to comply with your toughest installation problems.Constructed of 316 stainless steel, with a broad selection of available O-ring materials, they can be used in your toughest applications.
Specifications
| Operating pressure ranges | |
| Operating pressure | 250 psig maximum |
| Proof pressure | 375 psig |
| Burst pressure | 5,000 psig |
| Operating temperature ranges | |
| Viton seals | -20° to 450°F (-29° to 232°C) |
| Cv | .40 |
Ordering Information
| Part No. | Deion |
| 183552 | Panel mounted, pushbutton |
| 183554 | Bracket mounted, pushbutton |
| 183612 | Line mounted, pushbutton |
| 433553 | Bracket mounted, pilot operated |
| 433555 | Line mounted, pilot operated |
Hydraulic-Pneumatic Interface Valves
Occupying about a third of the space required by conventional diaphragm interface valves, this three-way, two position, normally closed valve permits a low-pressure signal from an integral pneumatic pilot to control a high-pressure hydraulic power system. The pilot section handles pressures to 1,000 psi; the hydraulic section accommodates pressures to 10,000 psi.In this unique spool valve design, the usual pilot diaphragm is replaced by a piston. The use of a stainless steel piston and compatible seal eliminates failures due to diaphragm leakage and incompatibility of diaphragm with process fluids.
A high ratio of hydraulic power pressure to pilot control pressure insures safe operation and positive control under all conditions. A pilot pressure of 50 psi controls 5,000 psi hydraulic power; 80 psi pilot pressure controls 10,000 psi hydraulic power pressure.
A soft seal design insures zero leakage in the hydraulic power section. Metal-to-metal seating insures against leakage in emergency situations.
Failsafe closure is insured, as both the internal spring and hydraulic pressure acting on the differential spool area provide sufficient force to effect closure, should one or the other fail. Normally both act to close the valve.
A positive indicator of operation is provided in the spool extension, which shifts to show position.
Excellent flow capacity is provided with a value of Cv=0.5 or the equivalent of an orifice of .224 inch diameter.
A normally open version of this valve is also available under product number 433242-P.
With minor differences the dimensions and operating parameters are the same for this version.
The manual override version has a turning handle located at top center of piston housing.
Specifications
| Complete assembly | |
| Weight | 5.8 lbs. (2.6 Kg) |
| Pilot section | |
| Fluid | Air or hydraulic |
| Operating pressure | 50 psi (3.45 bar) air pressure for 5,000 psi (345 bar) hydraulic pressure 80 psi (5.5 bar) air pressure for 10,000 psi (689 bar) hydraulic pressure |
| Working pressure | 1,000 psi (68.9 bar) maximum |
| Proof pressure | 1,500 psi (103.4 bar) |
| Burst pressure | 2,000 psi (137.9 bar) |
| Valve section | |
| Fluid | Hydraulic fluid or diesel |
| Working pressure | 10,000 psi (689 bar) maximum |
| Proof pressure | 15,000 psi (1034 bar) |
| Burst pressure | 20,000 psi (1379 bar) |
| Temperature range | -65° to 450°F (-53° to 232°C) |
| Flow capacity | Cv +0.5 |
| Flow | 39 GPM at 5,000 psi (147 liters per minute at 345 bar) |
| Internal leakage | Zero |
| External leakage | Zero |
Ordering Information
| Part No. | Deion |
| 183834-P | 6,000 psi working pressure, manual override, Viton seals |
| 433174-P | 6,000 psi working pressure, standard and H2S-CO2 service, Viton seals |
| 433174-PA | 6,000 psi working pressure, Arctic service, -65°F Buna-N seals |
| 433174-PH | 8,000 psi working pressure, standard and H2S-CO2 hydraulic pilot, Viton seals |
| 433174-PHA | 8,000 psi working pressure, Arctic hydraulic pilot, -65°F Buna-N seals |
| 433242-P | 6,000 psi working pressure, normally open, Viton seals |
| 433707-P | 6,000 psi working pressure, two inlet, Viton seals |
| 434189 | 10,000 psi working pressure, standard and H2S-CO2 service, Viton seals |
Excess-Flow Check Valves
The Pneu-Hydro excess-flow check valve has been designed to contain pressurized fluids in the event of catastrophic down-stream failure. Its poppet is normally held open by a spring and flow is permitted in both directions through the valve. In the event of down-stream failure (line-rupture, seal-failure, gauge over-pressurization and failure, etc.) the resultant pressure-drop across the poppet orifice creates an imbalance which closes the poppet. The poppet remains closed, preventing further escape of fluid, until the system is repaired. Removal of supply pressure for system maintenance allows the spring to reset the poppet to its open position.
Specifications
| Operating pressure ranges | |
| Service | Standard, H2S-CO2 |
| Design specification | NACE MR-01-75 |
| Fluid | Liquid or gas |
| Operating pressure | 50 psi (3.45 bar) |
| Working pressure | 7,500 psi (517 bar) maximum |
| Proof pressure | 10,000 psi (689 bar) |
| Burst pressure | 15,000 psi (1034 bar) |
| Operating temperature ranges | |
| Viton temperature range | -20° to 450°F (-29° to 232°C) |
| Flow capacity | Cv .45 |
| Flow | Valve shuts pneumatically at 1.0 psid Sensitivity can be adjusted by sizing orifice (2) or springs (consult factory) |
| Internal-external leakage | Zero |
| Weight | .375 lbs. |
Ordering Information
| Part No. | Deion |
| 213677 | Viton seals |
Sand Probe Valves
Continuous monitoring of the effects of an abrasive product on flowline and valves is possible with the use of the Pneu-Hydro Products sand probe.A sensing probe of a predetermined thickness extends through the pipe wall into the flow path of the abrasive product. When the probe is cut, indicating a known degree of erosion to lines, valves, and fittings, pressure from the flowline enters the sand probe valve body, shifting the spool valve and vents off a control pressure. This signal may be used to either close a valve or trigger an alarm.
The device is suitable for use with pneumatic control systems. Select the probe length and thickness from the probe kit chart on this page.
The sensing pilot is designed with a 1/2 NPT male thread for attachment to the pipe. This surrounds a 1/4 NPT female connection. With this configuration, probes can be readily fabricated in the field from standard fittings and tubing.
Features and Advantages
- Wide pressure range: This device may be safely operated in flowlines containing pressures in the range of 25 psi to 10,000 psi.
- Control pressure range: The pilot handles a control system pressure of 20 psi to 250 psi.
- Visual indicator: When the probe has been cut and the pilot spool shifts, the palm button and red band on the main spool indicate that the pilot has been activated.
- Manual control: The palm button on the pilot may be used at any time to cycle the valve and test the system.
- Simplicity: When the probe has been cut by abrasive action of the flowing product, the pressure in the pipeline shifts the pilot spool.
- Choice of probes: Standard wall probes are available in thicknesses of .028; .035; .049; and .065 inches. Standard length probes are 6, 10, and 14 inches.
Selection Procedures
The sand probe gives an accurate indication of the erosion on the flowline and its components. In the following procedure, the use of probes of different wall thicknesses is demonstrated:- Pipe: 2-inch schedule 80 - normal wall thickness .218-inch.
- Minimum wall thickness for 1200 psi operation: .15 inch.
- Maximum allowable erosion: .068 inch (.218 minus .15).
Specifications
| Operating pressure ranges | |
| Sensing pressure | 10,000 psi (689 bar) maximum |
| Control pressure | 250 psi (17 bar) maximum |
| Operating temperature ranges | |
| Temperature range | -20°F to 450°F (-29°C to 232°C) |
| Product weight | 1.5 lbs. (.68 kg.) |
Ordering Information
| Basic valve body and repair kit. | ||||||||||||
| ||||||||||||
| For example, one Pneu-Hydro Products sand probe assembly for standard and H2S-CO2 service, part no. 434052. Parts request (for valve only), one repair kit for a Pneu-Hydro Products sand probe assembly for standard and H2S-CO2 service, part no. 614052. |
| | Pneu-Hydro’s pressure indicator offers easy to read evidence of the presence or absence of pneumatic pressure in a control circuit. When pressure rises to approximately 14 psi, a solid green band shows through the window. If the pressure drops below 8 psi, a red and white striped band appears. The colors are reflective for visibility in lighted surroundings. The striped section provides added recognition of system status under dimly lit conditions or for color-blind personnel. | ||||||||||||||||||||||||||||||||||
| Operating pressure ranges | |
| Working pressure | 250 psig |
| Proof pressure | 500 psig |
| Cv | .035 |
| Operating temperature ranges | |
| Ethylene Propylene seal | -65° to 300°F (-53° to 148°C) |
| Buna-N seals | -40° to 250°F (-40° to 121°C) |
| Viton seals | -20° to 450°F (-29° to 232°C) |
Ordering Information
| 1/8 NPT Connection | 1/4 NPT Connection | ||||
| Viton | Buna-N | Ethylene Propylene | Viton | Buna-N | Ethylene Propylene |
| 433774 | 433774-A | 433774-EPDM | 433775 | 433775-A | 433775-EPDM |
The Pneu-Hydro bar stock component filter uses a minimum number of parts for economy and reliability. It has a strong, durable element, with a large surface area that reduces the need for frequent cleaning or replacement. A unique assembly retains the filter element solidly, preventing flutter; yet it is easily removed for cleaning or replacement. It will not contribute to system pulsation. A variety of filtration ranges are available.The 316 stainless steel filter element and Teflon gasket permit use with a wide variety of corrosive fluids.
Specifications
| Operating pressure ranges | |
| System pressure | |
| Brass | 3,000 psig maximum |
| Stainless steel | 6,000 psig maximum |
| Maximum psid | 1000 across filter element (psid increases as filter collects contaminants) |
| Operating temperature ranges | |
| Temperature range | -65° to 450°F (-53° to 148°C) |
Ordering Information
| Inlet and Outlet Connections | Dimensions (inches) | Filtration Area (inches) | Model Numbers | ||
| L | H (across Hex flats) | Brass | 316 Stainless | ||
| 1/4 NPT Female | 2-11/16 | 3/4 | 1.5 | 501F4B | 501F4Q |
| 1/2 NPT Female | 3-17/32 | 1 1/8 | 2.7 | 501F8B | 501F8Q |
Filter Elements
The filters listed above are supplied with the proper elements for use at specific ranges of filtration. To order a desired range, add the indicated suffix number to the basic model number. To order replacement elements, use the element part number. (Filter elements are 316 stainless steel.)
| |||||||||||||||||||||||||||||||
| Example: Model No. 501F4B-2 designates a 1/4 NPT female thread brass housing with element for 5 - 10 micron filtration. | |||||||||||||||||||||||||||||||
O-Ring Tool Kit
This kit of specially designed tools for installing and extracting O-rings consists of:- Jogging and installation tool
- Jogging and removal tool
- Flat face prying tool
- Pointed prying tool
- Piercing tool
- Prodding tool
- Tweezers
The items are invaluable to engineers, technicians, and assembly personnel working on pneumatic, hydraulic and other fluid handling devices. They are fabricated from corrosion-resistant materials for compatibility with most fluids and may be used in clean-room applications.
Tools are packaged in an attractive plastic pouch with pockets to separate the various items.
Ordering Information
| Part No. | Deion |
| 001-ZOZ | 316 stainless steel tools |
(南昌市PNEU-HYDRA减压阀厂家)
PNEU-HYDRA减压阀
更多精品
PNEU-HYDRA减压阀
面议
减压阀
面议
进口减压阀
面议
DP27减压阀
￥ 100.00
减压阀PR-9
面议
供应减压阀
￥ 120.00
RP-6减压阀
￥ 580.00
供应减压阀
面议
电控减压阀
￥ 453.00