【瑞达】厂家 二两机一体除湿干燥机 除湿干燥机两机一体组合

说明：

       瑞达SDD系列两机一体除湿干燥机由除湿、干燥两种功能为一体，广泛适用于各种塑胶原料，尤其是吸湿性较强的工程塑料，如，PA、PC、PBT、PET等，蜂巢转轮在理想状态下最低可达-40°C一下的露点。该系列产品采用SD-H系列蜂巢转轮除湿机搭配下吹式全不锈钢欧化保温干燥料桶组合而成。

本机特点：

1.SDD系列欧化除湿干燥组合一律配备蜂巢转轮除湿机，造型为半开放式，整体造型美观新颖；集除湿、干燥二种功能于一体，并可选择一对多的系统；

2.保温式干燥机料桶采用特有下吹风管设计搭配旋风排气装置能提高干燥效率，并能防止热能散失，确保湿度；

3.该系列除湿系统采用双冷却器结构，确保更低回风温度及露点；

4.机器占地小，移动方便，可任意更换机台使用；

5.该机配备微电脑控制为标准配备，可选配PLC控制搭配LCD触控人界界面，操作集中方便，可控制整机自动运行；

6.可选配露记点，方便随时监控露点；

7可选配吸料盒与自动填料机，方便原料输送；

8.该符合欧规回路型时，机型后加注"CE“。：

Explain：

Rita SDD series two one dehumidifying dryer by dehumidification and drying of two functions, widely used in all kinds of plastic raw materials, especially the construction of strong hygroscopicity plastic, such as PA, PC, PBT, PET etc., the honeycomb in the minimum to the ideal state of -40 ~ C dew point. This series of products using SD-H series honeycomb dehumidifier collocation blow down type stainless steel insulation drying barrel Europeanization assembly.

Features of this machine:

1.SDD series of Europeanization dehumidification dehumidifier shall be equipped with a combination of honeycomb shape, semi open, shapely novel; dehumidification and drying of two kinds of functions, and can choose one of the many systems;

2 insulation dryer barrel adopts the unique design under the blowing pipe collocation cyclone exhaust device can improve the drying efficiency, and can prevent heat loss, ensure humidity;

The 3 series of dehumidification system with double cooler structure, to ensure that the lower the return air temperature and dew point;

4 the machine occupies a small area, easy to move, can be used to replace the machine;

5 the machine is equipped with microcomputer control as the standard, can be equipped with PLC control with LCD touch interface, easy to operate, can control the automatic operation of the whole machine;

6 optional with dew point, easy to monitor the dew point;

7 can be matched with the suction box and automatic packing machine, to facilitate the delivery of raw materials;

8 in line with the European regulatory circuit, the model after the filling CE". :