简   介

DEION

KANUO LP-1155干性脱模剂是一种喷雾式脱模剂，对大多数注塑模具成型的塑料和橡胶制品提供快捷，有效及无污染的脱模作用。

此干性脱模剂是专门为一些需要进行附带工序的制品而特别开发的，如印刷、油漆、电镀、热冲压和压焊等要求无所谓“硅酮问题”的操作。

优 点：

-超精细喷射使整个模得到完全覆盖

-提高光洁度，减少喷涂过量的风险

-减少因标记及运送时所产生的有关问题，快捷有效  

脱模且极具经济效益，只需一次喷涂便可多次脱模

-效能高而持久性强的润滑膜，能提供多次脱模，比

其他硅酮配方产品优胜

-对环境影响小，不含氯氟化碳（CFC）推进剂

-适合各类热塑性材料的使用，特别是ABS和PS

-不会影响附带工序操作

-缝纫线、台面、车针和刀片的优良润滑剂。

KANUO LP-1155 MOULD RELEASE AGENT(NON - PAINTBLE) is an aerosol applied release agent comtaining a highly effective silicone oil, specially formulated to provide a quick, effective, non-staining release of plastics and rubber for most types of plastic injection moulding.

Benefits：

-Ultra fine spray gives controlled application with complete coverage

-Improved finish and reduced risk of over application

-Reduces problems associated with marking and transfer, highly economical, efficient release, only one pass required for many shots of ejection

-Effective and long lasting film provides more numbers of release than most silicone formulations

-Low environmental impact, contains no CFC propellant

-Excellent for all thermal plastic, especially ABS and PS

-Will not affect subsequent operations.

-Excellent lubricant for sewing threads, table surface , needles and knives.

注意事项

PRECAUTIONS

-压力容器，避免阳光直接照射，存放在温度低於50°C的地方。

-切勿将容器戳穿或焚烧。

-不应喷向火焰或白炽的金属表面。

-易燃物品。

典型组分：

推进剂                   液化石油气

溶剂                    正己烷

活性成份                 硅 油

操作温度范围             高达270℃

-Pressurised container, protect from sunlight, store at temperature below 50℃

-Do not puncture or incinerate

-Do not spray on to naked flames Inflammable

-Inflammable

Typical Date：

Propellant                     LPG                  

Solvent                     Chlorinated Solvent

Active ingredient            Silicone Oil

Working Temperatrue Range   Up to 270℃