脱色罐 活性炭脱色罐 去杂脱臭罐 不锈钢油脂精炼设备

脱色罐Decolorization Tank

一、应用概述Application Overview

该脱色罐广泛应用于氨基酸、精制糖、味精、葡萄糖、淀粉糖、化学助剂、染料中间体、医 药 中 间 体、食品（添加剂）、饮料、药液制剂、生化制品、油脂等高色素溶液的脱色、提纯、净化、去除热原（Pyrogen）、除臭、去杂等。罐体设有夹层，可通入蒸汽（或热水循环）进行加热，使粉末活性炭在罐内借助搅拌器的运转， 在适宜的温度值条件下与物料充分混合、搅拌后而进行吸附脱色。

The living decolorization tank is widely used for decolorization, purification, purification, pyrogen removal, deodorization, impurity removal of high pigment solutions such as amino acids, refined sugar, monosodium glut a mate, glucose, starch sugar, chemical additives, dye intermediates, pharmaceutical intermediates, food (additives), beverages, liquid pharmaceutical preparations, biochemical products, oil, etc. The tank body is provided with an interlayer, which can be heated by steam (or hot water circulation), so that the powdered activated carbon can be fully mixed and stirred with materials under appropriate temperature conditions with the help of the operation of the agitator in the tank for adsorption and decolorization.

二、结构特性Structural Characteristics

1.立式、全封闭结构，无粉尘污染。

2.按物料特性定制搅拌装置，脱色效果好，搅拌传动平稳噪音低。

3.特别设置若减速机漏油后防止污染罐内物料的装置，物料无污染风险，且无使用成本，安全可靠。

4.夹套采用空心夹套、半圆盘管夹套、蜂窝夹套等（按需选择），加热效率高。

5.夹套外设置保温层，填充耐高温、抗老化的珍珠棉，具有良好隔热保温效果。

6.外饰面筒体采用不锈钢板镜面抛光、原色亚光或磨砂面亚光处理（供选），外形美观整洁。

7.内罐体表面做镜面抛光处理（粗糙度 Ra≤0.6μm）；各进出管口、视镜、人孔等工艺开孔与内罐体焊接处均采用拉伸翻边工艺圆弧过渡，光滑易清洗无死角，生产过程可靠、稳定，符合“GMP”等规范要求。

1. Vertical, fully enclosed structure, no dust pollution.

2. The mixing device is customized according to the material characteristics, with good decolorization effect, stable mixing transmission and low noise.

3. A device is specially set to prevent the materials in the tank from being polluted after the oil leakage of the reducer. The materials have no pollution risk, no use cost and are safe and reliable.

4. The jacket adopts hollow jacket, semi-circular coil jacket, honeycomb jacket, etc. (selected as required), with high heating efficiency.

5. heat insulation layer is installed outside the jacket, filled with high temperature resistant and anti-aging pearl cotton, which has good thermal insulation effect.

6. The external decorative surface cylinder adopts stainless steel plate mirror polishing, primary color matte or frosted surface matte treatment (optional), with beautiful and tidy appearance.

7. The inner tank surface shall be subject to mirror polishing (roughness Ra ≤ 0.6) μ m）； All process openings such as inlet and outlet pipe, sight glass, manhole and the welding of inner tank body adopt tensile flanging process for arc transition, which is smooth and easy to clean without dead angle, and the production process is reliable and stable, meeting the requirements of "GMP" and other specifications.

三、附件配置Attachment Configuration

快开式卫生人孔、窥视灯镜、温度计（指针式或液晶数显式）、真空接口、真空表、CIP 清洗器、料液进出口、采样口（采样阀）、回流口、夹套热媒进/出口等接口。

Quick opening sanitary manhole, peep lamp mirror, thermometer (pointer or LCD digital display), vacuum interface, vacuum gauge, CIP washer, feed liquid inlet and outlet, sampling port (sampling valve), return port, jacketed heat medium inlet / outlet, etc.

四、配置参数Configuration Parameter