供应塑料水平垂直燃烧试验机ZY6017

ZY6017 塑料水平垂直燃烧试验机
Plastic horizontal vertical burning test machine
 
一、适用范围：Scope of application
主要用于对塑料或塑料部件处于50W火焰条件下,水平或垂直方向燃烧,测定塑料及塑料部件燃烧性能。以判断塑料耐火等级。

Mainly used for the plastic or plastic parts in 50 w flame conditions, horizontal or vertical direction combustion, combustion performance determination of plastic and plastic parts. To determine the plastic refractory grade

二、 符合标准：Conform to the standard
符合GB/T2408标准
In line with the GB/T2408 standards
 
三、 燃烧箱体：Burning body:
3.1箱体：0.5m3，采用数控机床加工成型，圆弧造型美观大方.优质SUS304不锈材料/烤漆，具有美观防锈防腐等特点。
3.2箱体顶部设有抽风排烟系统，在试验完成时，能将废气排出到室外；试验过程中，此系统为停止状态。
3.3箱体正面设有试验过程中可以密封的钢化玻璃观察窗，便于观察试验情况。
Box 3.1:0.5 m3, USES the numerical control machine tool processing molding, circular modelling beautiful generous. High quality SUS304 stainless material/painting, has the characteristics of beautiful and rust corrosion.
Breeze for the 3.2 box at the top of the exhaust system, the test is completed, will waste gas discharge outside; During the trial, this system is to stop state.
3.3 enclosure front in the process of the test can be sealed toughened glass observation window, convenient for observation test.

四、 燃烧喷灯：Combustion burner
4.1本公司自制喷灯，完全符合IEC 60695-11-4：2004火焰A、B或C的要求。
4.2喷火口直径：Ф0.95±0.3mm，喷汽口：Ф0.9±0.03mm，喷口距空气进口高度为100±10mm
4.3喷灯角度：水平为90度，垂直为45度
4.4火焰高度：20±20。
4.1 this burner made by the company, fully conform to the IEC 60695-11-4:20 04 flame A, B or C request.
The crater diameter 4.2:0.95 + / - 0.3 mm, Ф steam jet mouth: Ф 0.9 + / - 0.03 mm, nozzle distance air inlet height is 100 plus or minus 10 mm
4.3 burner Angle: level is 90 degrees, vertical to 45 degrees
Flame height 4.4:20 + 20.
 
五、 测温系统：Temperature measurement system
5.1热传感器（铜制导管和热电偶）—导管结构应为传导率极高的电解铜。长度为8.8±0.02mm,直径：Ф5.5±0.01mm
5.2 K型热电耦，配0.5mm直径的不锈钢管做外套。
智能PID温控表和K型热电耦相匹配。其读数可大1000℃。
5.3整过测试系统为：活动式，测温时将其置于试验箱内，进行测温。
5.4配备电子秒表：精确到0.1S（在测温校验时备用）
5.1 thermal sensor (copper tube and thermocouples) - tube structure should be of high conductivity copper cathode. 8.8 + / - 0.02 mm in length, diameter, Ф 5.5 + / - 0.01 mm
5.2 K type thermocouple, do coat with 0.5 mm diameter stainless steel pipe.
Intelligent PID temperature control table and match the K type thermocouple. The readings can be 1000 ℃.
5.3 the whole test system is: the activity type, when the temperature to place it in test box, for temperature measurement.
5.4 equipped with electronic stopwatch: accurate to 0.1 S (standby) when temperature calibration